a
Products Catalog
Fan

1. Marine Axial Flow Fan

CZ series marine or navy axial fans (hereafter called the fan) are capable of blowing air, ocean air containing salt vapor, and corrosive air which contains oil vapor and a small quantity of acid steam generated by the natural evaporation of the batteries. They are suitable for cabin air ventilating and exchanging as well as boiler ventilation on ocean-going vessels. They are also applicable in other suitable occasion. The fan is designed and manufactured according to GB/T11864-2008 Marine Axial Fanand the currentShip Building Norms.

 

2. Marine Centrifugal Fan

CLQ series marine or navy centrifugl fans (hereafter called the fan) are capable of blowing air, ocean air containing salt vapor, and corrosive air which contains oil vapor and a small quantity of acid steam generated by the natural evaporation of the batteries. They are suitable for cabin air ventilating and exchanging as well as boiler ventilation on ocean-going vessels. They are also applicable in other suitable occasion. The fan is designed and manufactured according to GB/T11865-2008 Marine Centrifugal Fanand the currentShip Building Norms.

Small size, light weight, low noise, low vibration, good anti-corrosive, good airtight, small starting torque, strong anti-swing, vibration-proof and shock resistant.

 

 

 

 

 

3. Duct Fan

High capacity and reliability:

In-line centrifugal duct fan, type CK, is a straight-through radial fan. It is compact, with a high capacity and very easy to install. The CK fan can cope with high pressure and long duct runs, whilst still operating at an acceptable sound level. The fan speed can be controlled by voltage or frequency variation regulators. Several fans can be connected to the same controller providing the total nominal current of the fans does not exceed the rating of the controller. The CK ranges of fans are moisture resistant and are approved for installing in humid or damp environments. The fans are rated IP44 when installed in a duct system. They must not be used for transporting grinding dust, soot or similar. The casing is manufactured from pre-galvanized steel. Automatic thermo-contacts open if the temperature within the motor windings becomes excessive.

 Accessories:

Duct clamps, mounting brackets, back-draught shutters, louver shutters, safety grills and speed controllers.

 

About Us     |      Products     |     Services     |     Join Us       |     Site Map      |      Company Email       |     Global Network      |     Reference List

DMA Marine. ALL rights reserved .2019
本站由中华企业网制作维护 中华企业网 网站建设 上海网站建设 虚拟主机 域名注册 网站建设公司 中小企业网站建设 中国企业网 集团网站建设 电子商务网站建设 企业邮箱